Are hernia-mesh repair surgeries enough to cure hernias?

Hernias are more common than most people would like them to be. It can happen from simple everyday activities like driving a truck or occasional stress like heavy lifting. In women, postpartum period increases their susceptibility to hernias. In reality, anyone can develop a hernia, and experts perform over 1 million surgeries in the US each year. Although they are similar in many ways, hernias can be different depending on their origin and location. It happens when a part of the tissue or intestine squeezes through the weak section of the muscle. The abdominal wall is the most common location of all hernias. Most commonly, they appear as visible bulges.

image:medtruth.com/hernia-mesh-complications

Irrespective of their location and cause, most expert physicians and surgeons use hernia mesh to control the herniation process and support the weak tissue. Several studies show a direct link between the recurrences of a hernia after the implantation of the surgical tissue. However, this process requires the attention of some of the most skillful and experienced surgeons, since the failure of the process causes severe, life-threatening complications.

How common is hernia mesh complication in patients?

Hernia mesh complications are as standard as 1 in 3 surgery cases. The two of the most common signifiers are pain and recurring infections. It is essential for the patients to learn about the possible complications that can arise from surgery. This medtruth blog post will give you a precise idea about the risks, potential complications and ways to avoid complications of a hernia mesh implant operation.

Here are some of the symptoms that should tell you there’s something wrong with your hernia-mesh surgery –

i.             Discomfort and pain

Hernia mesh complications give rise to an indescribable pain that is akin to the suffering of herniation. The persisting discomfort can also lead to swelling and bruising. Skin rashes, redness, and edema can also occur at the site of the incision.

ii.           Infection and bleeding

A hernia mesh surgery can go wrong in many ways, but infection and bleeding are common signs of it. Redness, swelling, and heat in the area of the incision are telltale signs of an infection. Continuing infection can lead to fluid buildup, bleeding, and secretions. In case this happens, you need immediate medical attention.

iii.          Problem pooping

In medical terms, bowel obstruction is also a possibility of a botched surgery. That is common when the herniation occurs in the small intestine or large intestine. Even urinating can become a challenge in case the intestinal walls stick to the mesh. In more severe cases, doctors may need to remove the patient's surgical bowel.

iv.          Erectile dysfunction

ED is an effect most men would not like to experience and admit. However, hernia mesh complications may impede blood flow to the testicles. If erectile dysfunction occurs for a prolonged period, doctors may have to perform orchidectomy (testicular removal) on the patient.

v.           The resurgence of a hernia

That is one of the most distressing effects of an unsuccessful hernia mesh implantation surgery. Migration, fistula, perforation, and adhesion can lead to the recurrence of a hernia in the same location.

It is crucial for your health that you speak with your doctor in case you experience one or multiple of these symptoms. In most cases, hernia mesh revision or removal surgeries are necessary.

Read more...

Signs that tell you about termite infestation in homes

Termites are mighty insects that defy its tiny looks. The swarms of termites can invade a building without any prominent signs of its existence and can quietly cause severe damage to the building structure.  The structural stability of homes is under threat due to termite infestation.  Every year, there are reports of more than $5 billion in property damages due to termite attacks.

image:en.wikipedia.org

You cannot prevent termites from entering homes, but you can avoid it from causing harm. Early detection of termites can prevent the more significant damage. You might be left wondering if termites can hide behind the walls and eat away at the wooden structure but before it is too late arrange for an inspection by a professional pest control company like Atlas Pest Control to assess the situation.

Even before you arrange for a formal inspection of your home, you could make out from some visible signs if termites are present in your home and whether the surrounding environment is inviting the unwanted guests.

The sight of swarmers

Just as springtime cheers up your heart and you get ready to enjoy the beautiful season ahead, it also encourages termites to take a flight and seek new targets to attack.  During springtime, you will often see young female winged termites flying in swarms and heading towards homes that they target for their stay. Buildings that have undergone some damage during winter are the biggest attractions for the insects. Lights attract termites and once they start liking your home, the entire colony will follow.

Discarded wings

Even if you do not notice swarmers in your home, you cannot rule out the presence of termites and have to look for some other signs.  Often, near the doors and window sills, you would find tiny wings discarded by the insects that confirm its presence at your home. That is a very prominent sign that your house is under the threat of termites. Take quick action to eliminate termites so that it does not get the time to cause any damage.

Check the wooden structures

Termites feed on wood and eat it inside out so that the damage is not visible from outside. The wooden piece that appears good from outside might be hollow within. Tap all wooden parts and notice the sound which could indicate if the wood is hollow. Rotting woods are ideal homes for termites. Fast action could help to arrest the damage and eradicate termites from the location.

Look for dry wood termite infestation

Dry wood termites eat on infested woods and in the process excrete some of the food in the form of wood colored droppings. If you notice such dropping that resembles a pile of small wood-colored pellets, it is an ominous sign of termite infestation whether inside or outside the home.

The most destructive termites are subterranean termites that create mud tubes to maintain a supply of moisture as the insects travel from the colonies to a food source.  If you see mud tubes, get alert and call for pest control services.

 

Read more...

Tips for Sanding a Wood Deck

When a deck hits old age, it is destined to get destruction from infiltration by any kind of precipitation such as rain, hail, and snow. Water enters the deck and will eventually ruin the deck. When this happens, you ought to fill the holes with stain so that your floor does not end up flaking and eventually being useless. Sanding your wood deck is a good way to keep the floor in shape and increase its durability.

image:pixabay.com/en/wood-deck-child-kid-porch-926724

Sanding should  be done every time that signs of possible flaking appear. For more professional tips and sanding services, you can contact Brisbane Deck Sanding

In this article, I am going to show you several tips that you should have while you are on course to sand your floor. You should consider these guidelines if you want to have a hassle free and effective sanding experience.

1.   Check The Upcoming Weather

Wood stain will work its purpose if the right weather prevails and that is a dry weather. You should check the weather for what conditions are coming up in the next few days so that you can be able to know when to apply wood stain. Wood stain should be applied on a dry day and you should make sure that it is followed by at least two days for the deck to completely dry up. A temperature of between 50°F to 90°F is recommended for the stain to completely dry up. A damp deck would not be easy to sand so consider doing this during low humidity times.

2.   Prepare The Deck

The deck should be in a suitable condition before you apply sand to it. Make sure to remove all the dust and particles that exist in between splinters and wood cracks. Any presence of dirt and stains will make it hard for the sanding to adhere and you do not want that. If the particles are particularly hard to remove, you can always seek professional help. This way will be easier for the deck to be filled up. You can also use a pressure washer to get out the particles by yourself but this means you will have to wait three days before you apply sanding.

For decks that are older than 2002, you need to have a professional sand them for you since they release some poisonous gases to the air. Always remember to wear gas masks to prevent inhaling the dust during preparation.

3.   Use an Orbital Sander

When you are sanding, you should prefer to use an orbital floor sander rather than a flooring drum. A flooring drum removes materials too quickly and you will end up sanding too much of your deck. Most floors are made of softwood so it is safer to use an orbital sander. An orbital sanding is a good choice for wood sanding since it goes at a pace you can control so you will not create big gorges when you come across bumps and other uneven levels on the deck. You should always remember to carry a hammer since old decks have raised nails.

4.   Find The Right Type Of Stain

There are very different types of decks and respective stains. Not all stains will fill a certain deck. It is therefore advisable for you to find the right type of stain for your deck. Search for information online or just inquire from your local store. Each type of stain has its own advantages and disadvantages. You cannot put a transparent stain where a solid stain used to exist as it would make your deck messy and ugly. You ought to know which type of stain was used on a floor before applying a new stain. Transparent stains cannot be applied over a solid stain, as this will make the surface of the deck unattractive.

5.   Choose The Right Type of Brush

Another hack is to choose an appropriate brush. The right brush ensures that the stain is applied effectively on the deck. I know there are some people who prefer to use a cloth to a brush. It is possible to use a brush to apply stains to your deck but remember the need for cleanliness forces you to find a brush. A good brush should have very small bristles. It should also be soft to prevent it from scratching the surface of the deck and apply a large volume of stain in a short period.

6.   Vacuum The Deck After Sanding And Staining It

After sanding, you should vacuum the dust and particle that remain on the deck immediately. This will prevent the dust from picking up moisture from the environment and dampening the sanded floor. Do not let any kind of water to get on the floor since wetness raises the wood grain and cause furring making the completely sanding process useless.

Read more...